Revolution XT C
Designed as a centre channel loudspeaker ideal for dialogue and centre-stage vocal reproduction, the XT C features the compact 100 mm (4 inch) Omnimagnet Dual Concentric driver from the XT Mini for supremely articulate presentation in any room.
The Omnimagnet dual is augmented with twin 100 mm (4 inch) mid/bass drivers to deliver deep bass reproduction down to 62 Hz, bringing authentic presence to movie dialogue.
The compact 7.6 litre XT C cabinet utilises the low colouration trapezoid shape that defines the Revolution range, with extensive bracing to further enhance accuracy across the audio band. A unique variation on the XT-series plinth has been designed specifically for the XT C, allowing the speaker to be angled low, mid or high depending on its placement relative to the listener. The three-point contact with the speaker provides stable support whether the XT C is placed below or above a TV screen or directly behind an acoustically transparent projection screen.
Recommended Amplifier Power
|25 - 120|
Continuous Power Handling
(Watts Peak RMS)
|Peak Power Handling (Watts)||240|
|Sensitivity (2.83 Volts @ 1m)||89 dB|
|Nominal Impedance (Ohms)||8|
|Frequency Response (-6dB)||62 Hz - 52 kHz|
|Dual Concentric™ High Frequency||20 mm (0.79") Linear PEI dome with Torus Ogive WaveGuide and Omnimagnet technology|
|Dual Concentric™ Low Frequency||100 mm (4”) multi-fibre paper 35 mm (1.38”) voice coil|
|Crossover Frequency||2.8 kHz|
|Crossover Type||Passive low loss 2nd order low pass, 1st order high pass|
|Enclosure Type||Rear ported reflex|
|Volume||7.6 l (0.27 cu. ft.)|
Dimensions H x W x D
176.9 x 450 x 205.6 mm|
|Weight||7.9 kg (17.5 lbs)|