Designed on the same rigid ABS chassis as the flagship iW 62 TDC, this in-wall subwoofer packs in two 165 mm (6.5 inch) long throw drivers that can be configured in active or passive mode and either mono or stereo configuration.
The active mode configuration bypasses the crossover to allow an external control to control the bandwidth and roll-off points of the drivers, while, the stereo configuration avoid the need to mesh stereo LF output into a mono signal if only a single iW62 is being used in the system. At 92 dB/Watt efficient and capable of handling 400 Watt programme power and 800 Watt peaks, the iW 62 TS is capable of producing bass from 29 Hz to 110 Hz (passive mode) at 117 dB average maximum SPL with 123 dB peaks. Its smooth response across the limited LF range ensure seamless integration with other iW models.
|Driver Complement||2 x 165mm (6.50" ) drive units with long throw multi fibre paper pulp cones|
|Active||determined by controller|
|Finish||White - paintable|
|Connectors||Gold plated spring terminals|
|Dimensions (H x W)||
Front Baffle: 473.50 x 227mm
(18.68 x 8.94")
Mounting Panel Thickness: 25mm Maximum
|Cut-out Dimensions (H x W)||
426.1 x 187.6mm
(16.78 x 7.39")
|Rec. in-wall Mounting Volume||