Using a large format chassis built from UV stabilized ABS, the iW 62 TDC leverages the performance of the class-leading iW 6 TDC and adds a second 165 mm (6.5 inch) bass driver for astounding bass response down to 35 Hz.
Solidly built and capable of withstanding continuous 120 Watts RMS power handling and short term peaks up to four times that power, the iW 6 TDC’s high efficiency design (92 dB/Watt) means it is capable of exceptional high peak SPL and outstanding dynamic range. For fine tuning the speaker performance to the room a front mounted switch gives +/- 1.5 dB adjustment on the HF output energy.
High-end features include the ability to bi-wire or bi-amplify the iW 62 TDC for peak audio performance using the dual pairs of gold plated spring terminals and TANNOY’s unique fifth terminal to ground the driver chassis. This reduces RF in the system, which can reduce the potential for hum and improve sound quality. Eight of TANNOY’s unique self-aligning clamps are used to fit the iW 62 TDC rigidly into the wall cavity, creating a solid and stable platform for the drivers.
|System Type||In-wall loudspeaker|
|Frequency Response (1)||70Hz - 51kHz ( /-3dB)|
|Low Frequency Alignment (2)||34Hz (-6dB)|
|Recommended Amplifier Power||20 - 210W @ 8 Ohms|
|Power Handling (3)||
|Sensitivity 2.38 Volts @ 1 metre (1)||
Half space: 95dB
|Maximum SPL @ 1 metre (4)||
SuperTweeter™: 25mm (1.00”) titanium dome
Dual Concentric™: 165mm (6.50”)
Bass driver: 165mm (6.50”)
|Frequency||750Hz, 1.8kHz, 16kHz|
|Maximum SPL (4)||107dB|
|Wattage Tap Selections||60, 30, 15, 7.5 Watts|
|Finish||White - paintable|
|Connectors||Gold plated spring terminals|
|Dimensions (H x W)||
Front Baffle: 473.5 x 227mm
(18.64 x 8.94”)
Maximum wall thickness: 25mm (1.00”)
|Cut-out Dimensions (H x W)||
426.10 x 187.60mm
(16.76 x 7.39")
|Rec. in-wall Mounting Volume||
Back can with 60 Watt transformer
(1) Average over stated bandwidth, measured at 1m on axis in an anechoic chamber, in a critically tuned enclosure.|
(2) Measured ?€˜in-wall’.
(3) Long term power handling capacity as defined in EIA standard RS - 426A. Crest factor 6.
(4) Unweighted pink noise input, measured at 1m in an anechoic chamber.